XAT Strat
Comments 2

A timing strategy for the XAT

I never thought I will be doing a timing strategy post since the CAT has gone with fixed sectional time-limits for a long time now. But a reader asked for one for the XAT and thought it might not be a bad idea to do a short post on the same.

I have always preferred a test without sectional time-limits since it tests a crucial quality required for management — optimizing resources to achieve maximum return on investment. In this case, the resources are your own skills and the investment is your time. 

So how does one go about using the 180 minutes on the XAT?


Breaking 180 into smaller blocks

The first thing that you have to do is ensure that you clear all sectional cut-offs. This can be tougher than it seems on tests without sectional time-limits since you can get stuck on your favorite section!

The catch hence is to maximize your areas/sections of strength while clearing the cut-off(s) on your weaker section(s).

The best way to do this is by keeping a buffer that allows you to take stock and play the paper on its merit.

I’d say you should allot 45-45-45 for VA-LR, QA-DI and DM respectively.


Use the fixed blocks to clear the cut-offs

Your first task is to clear the sectional cut-offs. Use the 45 minutes per section to solve 13-16 questions in each of the 3 sections by choosing and leaving correctly.  

This is not a tough ask since you have more than 2 minutes per question.

What will result in this plan failing is if you end up solving each and every question without leaving some for later and leaving some altogether.

What order should I attempt in? 

Should you attempt your section strength first or your Achillees’ heel first?

Should it matter which section you attempt first?

You can start with your strength first so that you can get as many marks in your bag.

But someone else might say, that one should start with DM or VA first since it involves a lot of reading and you will get progressively tired as the test moves ahead.

I feel that if you have don’t have the stamina to perform for 180 minutes then no strategy can help you.

I’d say whatever happens don’t start with DM (unless you feel DM is your strength and if you feel you so then something is seriously wrong )

The reason I say this is that the DM section can spring maximum uncertainty and you are better off dealing with it once you have cleared the cut-offs of the other two.


Do not break the time-block under any circumstance

When I took the CAT the second time, it was a 120 minute 150 question test. My VA was very strong and I could solve 50 questions in 40 minutes flat. The challenge (back then) was to clear the cut-off in QA.

I could have solved all 50 VA in 40 and then moved on to the other two sections but I decided otherwise.

I stopped the VA section after 30 minutes, I would have solved around 35 questions — good enough to have cleared the cut-off.

I then did the QA and DI-LR sections, ensuring that I solved enough questions to clear the cut-off. In the end, I had some time left and I came back to polish off the remaining VA questions.

I attempted about 100 questions in all if I remember correctly, about 45 in VA and the rest equally split between QA and DI-LR.

If I had spent an extra 10 minutes on VA, I would not have gone into the other two sections knowing that I have time on my side even if the section got tough. 

So whatever happens ensure that you stick to the time-block and don’t exceed it.


10 minutes are more than enough for GK

After you finish the three sections, do the GK section for 10 minutes.

If you are absolutely clinical without dithering over any question — you either know or you don’t — you can finish the 25 questions in 8 minutes.

The least you can do is to do it in two rounds, marking off the sure-shot ones first and then come back to do the 50-50s later.

I’d rather you not leave it for the end since you will end up leaving barely anytime for the same and might make silly mistakes on questions you know as well.

One you finish the GK section, you should move to the buffer zone.


How to use the buffer time

How you use the buffer time can determine whether you end up getting an XL call or not.

What are situations you can find yourself at the end of 145 minutes.

You are confident of clearing all the cut-offs

If the paper goes according to plan and you are confident of clearing all cut-offs then go back to your strong area to increase your overall score.

When you go back to your favorite section, ensure that you are not engaging with the really tough questions and getting stuck on them.

On average you should have about 9-12 questions left at this point and you spend about 10-15 minutes knocking off all the moderate ones.

You do not want to be caught in the middle of a passage in the last 10 minutes and hence do not leave the DM section for the last 10 minutes of the buffer time.

Your last 10 minutes should be either VA-LR or QA-DI. 

One or two sections do not go well

If say one or two sections have not gone well at the end of 145 minutes and you are doubtful about them attack them first in the buffer zone.

So do enough to clear the cut-off by eking out whatever you can and move on to the other section.

If two out of three sections go badly then it will mean that you will give very little time to the one that went well.

The buffer time-block is for you to ensure that you clear any sectional cut-offs if you haven’t done that already or focus on clearing the overall cut-off.

If you feel that 45 minutes are too few then use a 50-50-50 time-blocks.

But in no case can you exceed 50 per section.

So your 180 minutes should essentially be:

  • First 45 – QA-DI or VA-LR
  • Second 45 – QA-DI or VA-LR
  • Third 45 – Decision Making
  • 10 minutes – GK
  • First Buffer – QA-DI or VA-LR or DM
  • Second Buffer – QA-DI or VA-LR or DM
  • Last Buffer – QA-DI or VA-LR 

It goes without saying that it is not mandatory that you have three buffer blocks, it depends on how the paper is and how you have performed.

Also, it is important to mark out questions to return to in your buffer-time — the ones that can be solved but will take about 3-4 minutes.

With sectional time-limits it is like batting in the first innings just go out and make as many as you can, without them, it is similar to planning a successful chase.

 Happy chasing!

Advertisements

2 Comments

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.